Suggestlink.tpl - Conditional <IF {MEMBERUSERGROUP} is 1 and {SWITCH_MEMBERS} and not {SWITCH_AUTOREGISTER}> is not working as it still shows the stuff, even though I have autogenerate accounts switch on.
Upgrades should work, I've upgraded most of my sites. Keeping old templates is difficult to support though -- 4.0.x templates will work, but won't work the same, things like the link bit and pagination and navigation templates won't be used with old templates.
Post #2 required some major rewriting to make the autogenerated member exist before the link is processed, so the fix has probably created another hundred bugs.
babrees wrote: Do you have any info on how the tags work yet? (I know you're busy )
Any specific question there? I don't know what to document. You type words separated by commas.
babrees wrote: Is there any way we can force the 0 to be shown?
Seems like this must've come up sometime in the past 5 years but I can't remember what the answer was. I'll add CURRENCY} variables and hope I'm not duplicating something...
0/5
1
2
3
4
5
This thread is closed, so you cannot post a reply.
Comments on 4.1.0 Beta 1
Expert
Usergroup: Customer
Joined: Aug 19, 2005
Location: England
Total Topics: 391
Total Comments: 1303
Posted Jul 12, 2007 - 12:32 AM:
Suggestlink.tpl - Conditional <IF {MEMBERUSERGROUP} is 1 and {SWITCH_MEMBERS} and not {SWITCH_AUTOREGISTER}> is not working as it still shows the stuff, even though I have autogenerate accounts switch on.
Expert
Usergroup: Customer
Joined: Aug 19, 2005
Location: England
Total Topics: 391
Total Comments: 1303
http://www.spaintoday.co.uk
After a guest submits a link a new account is made. When they log in to that account they
cannot edit their own link
when submitting a link they get the message it will appear but instead it goes to await validation.
Attached are the usergroup permissions for both guest and member. Autogenerate account switch is on
Attached Files:
Expert
Usergroup: Customer
Joined: Aug 19, 2005
Location: England
Total Topics: 391
Total Comments: 1303
In register.tpl there is a parenthesis missing in the table header
Registration</td>
Expert
Usergroup: Customer
Joined: Aug 19, 2005
Location: England
Total Topics: 391
Total Comments: 1303
Do you have any info on how the tags work yet? (I know you're busy )
Expert
Usergroup: Customer
Joined: Aug 19, 2005
Location: England
Total Topics: 391
Total Comments: 1303
Sorry for all these Paul, just thought it might be easier if all my beta 1 queries were in one thread!
I have a new field named price and it is a floating point. When it displays it drops the zero off the end, ie £5.50 displays as £5.5
Is there any way we can force the 0 to be shown?
Member
Usergroup: Customer
Joined: Jul 01, 2007
Total Topics: 17
Total Comments: 49
I went to download the 4.1.0 Beta 2
is it possible to switch from the 4.0.33 (documentation ?)
or it's necessary to make a new fresh install ?
tks
developer
Usergroup: Administrator
Joined: Dec 20, 2001
Location: Diamond Springs, California
Total Topics: 61
Total Comments: 7868
Upgrades should work, I've upgraded most of my sites. Keeping old templates is difficult to support though -- 4.0.x templates will work, but won't work the same, things like the link bit and pagination and navigation templates won't be used with old templates.
developer
Usergroup: Administrator
Joined: Dec 20, 2001
Location: Diamond Springs, California
Total Topics: 61
Total Comments: 7868
Post #2 required some major rewriting to make the autogenerated member exist before the link is processed, so the fix has probably created another hundred bugs.
Do you have any info on how the tags work yet? (I know you're busy )
Any specific question there? I don't know what to document. You type words separated by commas.
Is there any way we can force the 0 to be shown?
Seems like this must've come up sometime in the past 5 years but I can't remember what the answer was. I'll add CURRENCY} variables and hope I'm not duplicating something...